Nylon (PA6)In Stock NZ
Nylon 6 Sheet — Natural 20mm
NYL-NA-2000
1000 x 500mm · 20mm
Pricing
Price on enquiry / sheet
Nelson · South Island
Nylon Sheet & Rod in Nelson
At Plastics Hub NZ we supply nylon sheet & rod to Nelson fabricators, engineers and procurement teams every working day. Cast nylon (PA6) sheet and rod for bushes, bearings, gears, rollers and general machined components. Orders for Nelson are picked at christchurch distribution centre and dispatched 1–2 days from Christchurch, so the aquaculture, boat building and seafood processing businesses around the Port Nelson engineering cluster can keep jobs moving without holding their own stock.
Everything is cut to size and there is no minimum order. Send us an enquiry and we will come back with trade pricing for your quantities plus freight into Nelson, confirmed before you commit.
Why Nelson workshops specify nylon
Nylon Sheet & Rod is one of the most requested ranges we freight into Nelson, largely because of the aquaculture, boat building and seafood processing work based here. If you are unsure whether it is the right material for your application, talk to us before you buy — our team will compare it against the alternatives we stock and tell you honestly which one suits the duty.
- High tensile strength and stiffness for a thermoplastic
- Good fatigue resistance in gears and cams
- Self-lubricating running against steel
- Machines to fine tolerances and surface finishes
Nylon Sheet & Rod applications around Nelson
Across Nelson and the wider Nelson region — including Richmond, Motueka, Stoke, Mapua — we see this material used for:
- Bushes, bearings and wear pads
- Gears, sprockets and cams
- Conveyor rollers and guides
- Machined replacement parts for plant maintenance
Sizes held in stock
Natural and black cast nylon sheet from 10mm to 60mm, plus rod from 20mm to 200mm diameter.
Cutting & fabrication
Turns and mills like a soft metal. Allow for moisture pick-up when machining close-tolerance parts. Send a drawing or a DXF with your Nelson delivery address and we will quote the finished part. See our fabrication services.
Delivery to Nelson
Dispatched from 93 Buchan Street, Sydenham, Christchurch 8023 — 1–2 days from Christchurch. Freight into Nelson is quoted with your materials. In-stock lines confirmed before 2pm ship the same working day.
Christchurch branch · 03 365 7557Nylon Sheet & Rod available for Nelson delivery
Add the lines you need to an enquiry and we will price them for your quantities, ex GST with GST shown separately.
Nylon (PA6)In Stock NZ
Nylon 6 Rod — Natural 50mm
ROD-NYL-N050
50mm dia · 1000mm length
Pricing
Price on enquiry / length
Nylon questions we are asked in Nelson
- Does nylon absorb moisture?
- Yes — nylon takes up moisture from the air and grows slightly as it does, typically a few tenths of a percent. Machine parts allowing for that growth, or specify acetal where dimensional stability is critical.
- Nylon or acetal for a bearing?
- Nylon carries higher loads and absorbs shock better, so it suits heavily loaded bushes and wear pads. Acetal is dimensionally stable and lower friction, which makes it the better choice for precision moving parts.
- What is the maximum operating temperature for nylon?
- Cast nylon runs continuously to around 100°C, with short-term excursions higher. Above that, PTFE or a filled grade is the safer specification.
Other materials we supply in Nelson
Need nylon sheet & rod delivered in Nelson?
Send your sizes and quantities and we will come back with trade pricing, a freight figure for Nelson and a dispatch date.